Wizard Setup: Wireless Lan; Figure 11 Wizard 2 : Wireless Lan Setup; Table 4 Wizard 2 : Wireless Lan Setup - ZyXEL Communications ZyAIR G-3000 User Manual

3.3 Wizard Setup: Wireless LAN

Use the second wizard screen to set up the wireless LAN.

Figure 11 Wizard 2 : Wireless LAN Setup

The following table describes the labels in this screen.

Table 4 Wizard 2 : Wireless LAN Setup

LABEL
Wireless LAN Setup
ESSID
Choose Channel ID
Scan
WEP Encryption
ASCII
Hex
Chapter 3 Wizard Setup
DESCRIPTION
Enter a descriptive name (up to 32 printable 7-bit ASCII characters) for the
wireless LAN.
If you change this field on the ZyAIR, make sure all wireless stations use the
same ESSID in order to access the network.
To manually set the ZyAIR to use a channel, select a channel from the drop-
down list box. Open the Channel Usage screen to make sure the channel is
not already used by another AP or independent peer-to-peer wireless network.
To have the ZyAIR automatically select a channel, click Scan instead.
Click this button to have the ZyAIR automatically scan for and select a channel
with the least interference.
Select Disable allows all wireless computers to communicate with the access
points without any data encryption.
Select 64-bit WEP or 128-bit WEP to allow data encryption.
Select this option in order to enter ASCII characters as the WEP keys.
Select this option to enter hexadecimal characters as the WEP keys.
The preceding 0x is entered automatically.
ZyAIR G-3000 User's Guide
44