Wireless Lan Setup; Figure 49 Menu 3.5 Wireless Lan Setup; Table 41 Menu 3.2 Tcp/Ip Setup - ZyXEL Communications Wireless-11g Access Point ZyXEL G-1000 v2 User Manual

ZyXEL G-1000 v2 User's Guide
Follow the instructions in the following table on how to configure the fields in this menu.

Table 41 Menu 3.2 TCP/IP Setup

FIELD
IP Address
Assignment
IP Address
IP Subnet Mask
Gateway IP
Address
When you have completed this menu, press [
save your configuration, or press [

12.3 Wireless LAN Setup

Use menu 3.5 to set up your G-1000 v2 as the wireless access point. To edit menu 3.5, enter 3
from the main menu to display Menu 3 – LAN Setup. When menu 3 appears, press 5 and then
press [ENTER] to display Menu 3.5 – Wireless LAN Setup as shown next.

Figure 49 Menu 3.5 Wireless LAN Setup

ESSID= ZyXEL
Hide ESSID= No
Channel ID= CH06 2437MHz
RTS Threshold= 2432
Frag. Threshold= 2432
WEP Encryption= 64-bit WEP
Default Key= 1
Key1= ********
Key2= ********
Key3= ********
Key4= ********
Authen. Method= Auto
Press ENTER to Confirm or ESC to Cancel:
Note: In the SMT, the ESSID is referred to as SSID. Both of them refer to the same ID
for the G-1000 v2.
100
DESCRIPTION
Press [SPACE BAR] and then [ENTER] to select Dynamic to have the G-1000 v2
obtain an IP address from a DHCP server. You must know the IP address assigned
to the G-1000 v2 (by the DHCP server) to access the G-1000 v2 again.
Select Static to give the G-1000 v2 a fixed, unique IP address. Enter a subnet mask
appropriate to your network and the gateway IP address if applicable.
Enter the (LAN) IP address of your G-1000 v2 in dotted decimal notation
Your G-1000 v2 will automatically calculate the subnet mask based on the IP
address that you assign. Unless you are implementing subnetting, use the subnet
mask computed by the G-1000 v2.
Type the IP address of the gateway. The gateway is an immediate neighbor of your
G-1000 v2 that will forward the packet to the destination. On the LAN, the gateway
must be a router on the same network segment as your G-1000 v2.
ENTER
ESC
] at any time to cancel.
Menu 3.5 - Wireless LAN Setup
] at the prompt "Press ENTER to Confirm..." to
Edit MAC Address Filter= No
Edit Roaming Configuration= No
Breathing LED= No
802.11 Mode= Mixed
Output Power= 17 dBm
Block Intra-BSS Traffic= No
Chapter 12 LAN Setup