Log Commands - ZyXEL Communications Wireless Access Point ZyAIR B-500 User Manual

TYPE CODE
13
0
14
0
15
0
16
0
LOG MESSAGE
Mon dd hr:mm:ss hostname
src="<srcIP:srcPort>"
dst="<dstIP:dstPort>"
msg="<msg>" note="<note>"

Log Commands

Go to the command interpreter interface (the Command Interpreter Appendix explains how to access and
use the commands).
Use the sys logs load command to load the log setting buffer that allows you to configure which logs
the ZyAIR is to record.
Use sys logs category followed by a log category and a parameter to decide what to record
Log Description
Chart I-2 ICMP Notes
Timestamp
Timestamp request message
Timestamp Reply
Timestamp reply message
Information Request
Information request message
Information Reply
Information reply message
Chart I-3 Sys log
This message is sent by the "RAS" when this syslog is
generated. The messages and notes are defined in this
appendix's other charts.
Configuring What You Want the ZyAIR to Log
ZyAIR B-500 Wireless Access Point User's Guide
DESCRIPTION
DESCRIPTION
I-3