Snmp Traps; Figure 14-2 Menu 22 Snmp Configuration; Table 14-1 Menu 22 Snmp Configuration - ZyXEL Communications Wireless Access Point ZyAIR B-500 User Manual

The following table describes the SNMP configuration parameters.
FIELD
SNMP:
Get Community
Set Community
Trusted Host
Trap:
Community
Destination
When you have completed this menu, press [ENTER] at the prompt "Press ENTER to confirm or ESC to
cancel" to save your configuration or press [ESC] to cancel and go back to the previous screen.

14.4 SNMP Traps

The ZyAIR will send traps to the SNMP manager when any one of the following events occurs:
SNMP Configuration
Menu 22 - SNMP Configuration
SNMP:
Get Community= public
Set Community= public
Trusted Host= 0.0.0.0
Trap:
Community= public
Destination= 0.0.0.0
Press ENTER to Confirm or ESC to Cancel:

Figure 14-2 Menu 22 SNMP Configuration

Table 14-1 Menu 22 SNMP Configuration

Type the Get Community, which is the password for the incoming
Get- and GetNext requests from the management station.
Type the Set Community, which is the password for incoming Set
requests from the management station.
If you enter a trusted host, your ZyAIR will only respond to SNMP
messages from this address. A blank (default) field means your
ZyAIR will respond to all SNMP messages it receives, regardless of
source.
Type the trap community, which is the password sent with each trap
to the SNMP manager.
Type the IP address of the station to send your SNMP traps to.
ZyAIR B-500 Wireless Access Point User's Guide
DESCRIPTION EXAMPLE
public
public
0.0.0.0
public
0.0.0.0
14-3