Configuring A Filter Rule; Table 6-2 Abbreviations Used If Filter Type Is Ip; Table 6-3 Abbreviations Used If Filter Type Is Gen - ZyXEL Communications Prestige 941 User Manual

The protocol dependent filter rules abbreviation are listed as follows:
If the filter type is IP, the following abbreviations listed in the next table will be used.
ABBREVIATION
Pr
SA
SP
DA
DP
If the filter type is GEN (generic), the following abbreviations listed in the next table will be used.
ABBREVIATION
Off
Len
Refer to the next section for information on configuring the filter rules.

6.2.2 Configuring a Filter Rule

To configure a filter rule, type its number in Menu 21.1 – Filter Rules Summary and press [Enter] to open
Menu 21.1.1 for the rule.
To speed up filtering, all rules in a filter set must be of the same class, i.e., protocol filters or generic filters.
The class of a filter set is determined by the first rule that you create. When applying the filter sets to a port,
separate menu fields are provided for protocol and device filter sets. If you include a protocol filter set in a
device filter field or vice versa, the Prestige will warn you and will not allow you to save.
Filter Configuration

Table 6-2 Abbreviations Used if Filter Type is IP

Protocol
Source Address
Source Port number
Destination Address
Destination Port number

Table 6-3 Abbreviations Used if Filter Type is GEN

Offset
Length
DESCRIPTION
DESCRIPTION
Prestige 941 Cable Router
6-5