Table 3-3 Internet Access Setup Menu Fields - ZyXEL Communications Prestige 941 User Manual

The following table contains instructions on how to configure your Prestige for Internet access.
FIELD
ISP's Name
Service Type
Server IP
My Login Name
My Password
IP Address Assignment
IP Address
IP Subnet Mask
Gateway IP Address
RIP Direction
Version
Single User Account
Edit Filter Set
Internet Access

Table 3-3 Internet Access Setup Menu Fields

Enter the name of your Internet Service Provider, e.g., myISP. This
information is for identification purposes only.
Choose Standard, RR – Toshiba Authentication Service and RR –
Manager Authentication Service. Choose RoadRunner service if your ISP
is Time Warner's RoadRunner otherwise, choose Standard. For
RoadRunner service, fill in the Server IP, login and password fields.
The Prestige will find the RoadRunner Server IP if this field is left blank. If it
does not, then you must enter the authentication server IP address.
Enter the login name given to you by your ISP.
Enter the password associated with the login name above.
If your ISP did not assign you an explicit IP address, select Dynamic
otherwise, select Static and enter the IP address and subnet mask in the
following fields.
Enter the IP address assigned to you when Static Assignment is selected.
Enter the subnet mask you assign when Static Assignment is selected.
Enter the gateway IP address when Static Assignment is selected.
Select the RIP Direction.
Select the RIP Version.
Please see the following section for a more detailed discussion on the Single
User Account feature. The default is Yes.
Use [space bar] to toggle this field to Yes and press [Enter] to open Menu 4.1
to edit the filter sets. See the CABLE Port Filter section for more details. The
default is No.
DESCRIPTION
Prestige 941 Cable Router
3-7