Navigating The Smt Interface; Figure 2-4 Login Screen; Table 2-2 Main Menu Commands - ZyXEL Communications Prestige 941 User Manual

Prestige 941 Cable Router
2.7

Navigating the SMT Interface

The SMT (System Management Terminal) is the interface that you use to configure your Prestige.
Several operations that you should be familiar with before you attempt to modify the configuration are listed
in the following table.
OPERATION KEYSTROKE
Move forward to
[Enter]
another menu
Move backward
[Esc]
to a previous
menu
[Enter] or
Move the cursor
[Up]/[Down]
arrow keys
Enter information Fill in, or
Press [space
bar] to toggle
Required fields
<
N/A fields <N/A>
Save your
[Enter]
configuration
Type 99, then
Exit the SMT
press [Enter].
2-8
Enter Password: XXXX

Figure 2-4 Login Screen

Table 2-2 Main Menu Commands

To move forward to a sub-menu, type in the number of the desired
sub-menu and press [Enter].
Press [Esc] to move back to the previous menu.
Within a menu, press [Enter] to move to the next field. You can also
use the [Up]/[Down] arrow keys to move to the previous and the next
field, respectively.
You need to fill in two types of fields. The first requires you to type in
the appropriate information. The second allows you to cycle through
the available choices by pressing [space bar].
All fields with the symbol <?> must be filled in order to save the new
?
>
configuration.
Some of the fields in the SMT will show a <N/A>. This symbol refers
to an option that is Not Applicable.
Save your configuration by pressing [Enter] at the message [Press
ENTER to confirm or ESC to cancel]. Saving the data on the screen
will take you, in most cases to the previous menu.
Type 99 at the main menu prompt and press [Enter] to exit the SMT
interface.
DESCRIPTION
Hardware Installation and Initial Setup