Prestige 941 Cable Router
3.4
Cable Port Filter
Use Menu 4.1 – Cable Port Filter to specify the filter set(s) to apply to the incoming and outgoing traffic
between the Internet and the Prestige. You can specify up to 4 filters separated by comma, e.g., 1, 5, 9, 12, in
each filter field.
NOTE: Spaces are accepted in this field. For more information on filters, see the
3.5
Single User Account
Typically, if there are multiple users on the LAN wanting to concurrently access the Internet, you will have to
lease a block of legal, or globally unique IP addresses from the ISP.
The Single User Account (SUA) feature allows you to have the same benefits as having multiple legal
addresses, but only pay for one IP address, thus saving significantly on the subscription fees. (Check with
your ISP before you enable this feature).
3-8
chapter on Filter Configuration.
Menu 4.1 - Cable Port Filter
Input Filter Sets:
protocol filters=
device filters=
Output Filter Sets:
protocol filters=
device filters=
Press ENTER to Confirm or ESC to Cancel:
Figure 3-4 Menu 4.1 – Cable Port Filter
Internet Access