Stacking Zyxel Cable Routers; Table 2-6 Config Cable Modem Web Page - ZyXEL Communications Prestige 941 User Manual

FIELD
Cable Modem Description:
Successful Scanned Channels
Channel Overwrite
Pre-defined Channel Scan Range:
Channel Plan
Start Channel
End Channel
Default Channel Scan Range

2.13 Stacking ZyXEL Cable Routers

Your Prestige has rubber pads that fit snugly into grooves for sturdy stacking. You should not stack more
than three routers for maximum stack stability.
Hardware Installation and Initial Setup

Table 2-6 Config Cable Modem Web Page

Hardware and firmware version of your Prestige 941.
The downstream channel successfully used before.
Set the current downstream channel.
This table defines the channel for scanning prior to normal
downstream frequency scanning. Five bands are implemented.
The channel plan can be:
EIA: EIA-542 Cable Television Channel Identification Plan.
HRC: Harmonic-Related Carrier Frequency Plan.
B
/G (CCIR): Europe Standard B + G Frequency Plan
OIRT: OIRT Standard D Frequency Plan
EURO: 250 kHz incremental Non-Standard Frequency Plan
Disable: no predefined channel band.
The start channel number for the range of the scanning channels.
The end channel number for the range of the scanning channels.
Choose the Channel Plan for selecting the full channel range.
Prestige 941 Cable Router
DESCRIPTION
2-17