Table of Contents
Advertisement
G-470 User's Guide
Figure 16 Web Configurator: the Status screen
Use
submenus
to configure
the ZyXEL
Device
The following table describes the labels in this screen.
Table 3 Web Configurator: the Status screen
LINK/ICON
Wizard
About
Logout
Status
System
Wireless
Management
Device
Information
40
FUNCTION
Use these screens for initial configuration including general
setup, wireless and security settings.
Click this icon to see details about your ZyXEL Device.
Click this icon to exit the web configurator.
Use this screen to look at the ZyXEL Device's general device,
system and interface status information.
Use this screen to change the name of the device and change
IP address settings.
Wireless Settings Use this screen to check for available access points and
configure basic and advanced wireless network setup.
Security
Use this screen to configure encryption settings.
Password
Use this screen to change your password.
Configuration File Use this screen to backup and restore configuration files and
reset the ZyXEL Device to its factory default settings.
F/W Upload
Use this screen to upload new firmware.
Device Name
This is the same as the device name you entered in the first
wizard screen if you entered one there. It is for identification
purposes.
Click the Logout icon at any time
to exit the web configurator.
Chapter 4 Introducing the Web Configurator
Advertisement
Table of Contents
Troubleshooting
