Chapter 2 Tutorial; Connecting To An Access Point; Before You Start; The Web Configurator - ZyXEL Communications ZyXEL ZyAIR G-470 User Manual

2.1 Connecting to an Access Point

This example shows you how to connect your ZyXEL Device to an access point (AP)
configured for WPA-PSK security, in order to access the Internet.
In the following diagram, your computer is labeled A, the ZyXEL Device is labeled B and the
access point is labeled C.

2.1.1 Before You Start

Before you connect to the AP, you must know its Service Set IDentity (SSID) and WPA-PSK
pre-shared key.
In this example, the AP's SSID is "AP6" and its pre-shared key is "ThisismyWPA-PSKpre-
sharedkey".
Connect your ZyXEL Device to your computer's Ethernet port and set your computer's IP
address as shown in the Quick Start Guide.

2.1.2 The Web Configurator

Use the following steps to set up your Internet connection using the Web Configurator.
1 Open your Internet browser and enter

Chapter 2 Tutorial

C
H A P T E R
192.168.1.11 in the Address (URL) bar.
G-470 User's Guide
2
Tutorial
27