Using The Ap Survey Tool; Resetting The Zyxel Device; Restoring Factory Defaults; Figure 24 Wizard: Confirm Your Settings - ZyXEL Communications ZyXEL ZyAIR G-470 User Manual

802.11g wireless ethernet adapter

Hide thumbs Also See for ZyXEL ZyAIR G-470:

Table of Contents

4.5 Using the AP Survey tool

To scan for available wireless access points in your network, click AP Survey in the Wireless

screen. Wait for the scan process to complete. A screen displays showing the scan results.

Click on an entry in the SSID column to select that device for the Basic Settings SSID field in

your Wireless page. See

Survey screen.

If you forget your password or cannot access the ZyXEL Device you will need to reset the

ZyXEL Device to the factory defaults. This means that you will lose all configurations that

you had previously saved. The username will be reset to admin and the password to 1234.

You can erase the current configuration and restore factory defaults in two ways:

• Use the RESET button on the ZyXEL Device to reset to the factory defaults. Use this

method for cases when the password or IP address of the ZyXEL Device is not known.

• Use the web configurator to restore defaults.

Chapter 4 Introducing the Web Configurator

Section 6.3.1 on page 60

for more information on using the AP

G-470 User's Guide

Table of Contents