G-470 User's Guide
6.5.1 Wireless Security: Disable
If you do not enable any wireless security on your device, your network is accessible to any
wireless networking device that is within range.
Figure 31 Wireless Security: Disable
The following table describes the labels in this screen.
Table 10 Wireless Security: Disable
LABEL
Encryption Method
Apply
Reset
6.5.2 Wireless Security: WEP
WEP provides a mechanism for encrypting data using encryption keys. Both the AP and the
wireless stations must use the same WEP key to encrypt and decrypt data. You can configure
up to four 64-bit or 128-bit WEP keys, but only one key can be used at any one time.
62
DESCRIPTION
Select Disable to have no wireless LAN security configured.
Click Apply to save your changes back to the device.
Click Reset to begin configuring this screen afresh.
Chapter 6 Wireless Screens