ZyXEL Communications G-102 Quick Start Manual

802.11b/g wireless cardbus adapter
Hide thumbs Also See for G-102:

Advertisement

Quick Links

ZyXEL G-102
(Hardware Revision v2)
802.11b/g Wireless CardBus Adapter

Quick Start Guide

Version 1.0
May 2005

Advertisement

Table of Contents
loading

Summary of Contents for ZyXEL Communications G-102

  • Page 1: Quick Start Guide

    ZyXEL G-102 (Hardware Revision v2) 802.11b/g Wireless CardBus Adapter Quick Start Guide Version 1.0 May 2005...
  • Page 2: Important Note

    ZyXEL G-102 Quick Start Guide Important Note Federal Communications Commission (FCC) Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
  • Page 3 ZyXEL G-102 Quick Start Guide This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
  • Page 4: Installation Requirements

    Thank you for purchasing ZyXEL G-102! The ZyXEL G-102 is an IEEE 802.11g compliant wireless LAN PC card that fits into any CardBus slot. With the G-102, you can enjoy the benefits of wireless networking with data rates up to 54Mbps.
  • Page 5 The installation procedures are similar for all supported Windows versions. Windows XP screen shots are shown unless otherwise specified. DO NOT insert the ZyXEL G-102 at this point. The G-102 Utility should be installed first. 1. Insert the support CD into the CD-ROM drive on your computer. The installation program will automatically run.
  • Page 6 LED side facing up, slide the ZyXEL G- 102 into the slot. The LEDs turn on if the ZyXEL G-102 is properly inserted. Never bend, force or twist the ZyXEL G-102 into the slot. 9. Double click the Z icon to configure your wireless adapter.
  • Page 7: Led Display

    ZyXEL G-102 Quick Start Guide If the ZyXEL Utility icon displays, the ZyXEL G-102 is installed properly. Refer to the User’s Guide to configure the ZyXEL G-102. The following table describes the LEDs on the ZyXEL G-102. COLOR STATUS Green...
  • Page 8: Troubleshooting

    Make sure the ZyXEL G-102 is properly inserted into the when inserting the CardBus slot. ZyXEL G-102 into Try to Insert the ZyXEL G-102 again. (Do not bend, force or the CardBus slot twist into the slot.) LED LINK is off Please check and make sure your AP/Router is up and running.
  • Page 9 ZyXEL G-102 Quick Start Guide PROBLEM CORRECTIVE ACTION Install the ZyXEL G-102 in another computer. If the error persists, there may be a hardware problem. In this case, please contact ZyXEL customer support at 800-978-7222 or on the web at http://www.us.zyxel.com.

Table of Contents