Chapter 2 Tutorial; Connecting To The Internet; Set Up Your User Name And Password; Table 4 Tutorial: Example Account Information - ZyXEL Communications MAX-100 Series User Manual

The following example shows you how to configure settings to join a wireless network and
access the Internet using the ZyXEL utility.

2.1 Connecting to the Internet

There are three parts to this example, as follows:
1 Set up your user name and password (in the Profile screen).
2 Set up search frequencies (in the Site Survey screen).
3 Confirm the connection (in the Link Info screen).
To access the Internet, you need information from your Internet Service Provider (ISP) about
your account and the network. In this example, your ISP has given you the following
information about your account:

Table 4 Tutorial: Example Account Information

User name
Password
Anonymous Identity
Available Frequencies
Downlink Frequency
Step
See Section 3.4 on page 31

2.1.1 Set Up Your User Name and Password

After you install the ZyXEL utility and then insert the ZyXEL Device (see the Quick Start
Guide for details) follow the steps below to set up your user name and password.
1 Start the ZyXEL utility and click the Profile tab to open the screen shown next.

Chapter 2 Tutorial

C
User1234
xyz9876
anonymous@zyxel.com
2.5, 2.525, 2.6 and 2.625
gigahertz (GHz)
25 megahertz (MHz)
for more information on radio frequencies.
ZyXEL MAX-100 Series User's Guide
H A P T E R
Tutorial
2
23