Reset To Factory Defaults; Restart; Figure 177 Reset Warning Message; Figure 178 Reset In Process Message - ZyXEL Communications Network Device P-2602 User Manual

25.5.3 Reset to Factory Defaults

Click the Reset button to clear all user-entered configuration information and return the
ZyXEL Device to its factory defaults. The following warning screen appears.

Figure 177 Reset Warning Message

Figure 178 Reset In Process Message

You can also press the RESET button on the rear panel to reset the factory defaults of your
ZyXEL Device. Refer to

25.6 Restart

System restart allows you to reboot the ZyXEL Device without turning the power off.
Click Maintenance > Tools > Restart. Click Restart to have the ZyXEL Device reboot. This
does not affect the ZyXEL Device's configuration.

Figure 179 Restart Screen

Chapter 25 Tools
Section 2.1.2 on page 51
P-2602H(W)(L)-DxA Series User's Guide
for more information on the RESET button.
307