2 Click Network in the icon bar.
3 For dynamically assigned settings, select Using DHCP from the Configure list.
Figure 212 Macintosh OS X: Network
4 For statically assigned settings, do the following:
5 Click Apply Now and close the window.
6 Turn on your ZyXEL Device and restart your computer (if prompted).
Verifying Settings
Check your TCP/IP properties in the Network window.
Appendix C Setting up Your Computer's IP Address
•
Select Automatic from the Location list.
•
Select Built-in Ethernet from the Show list.
•
Click the TCP/IP tab.
•
From the Configure box, select Manually.
•
Type your IP address in the IP Address box.
•
Type your subnet mask in the Subnet mask box.
•
Type the IP address of your ZyXEL Device in the Router address
box.
P-2602H(W)(L)-DxA Series User's Guide
351