Table 168 Rtp Logs; Table 169 Fsm Logs: Caller Side; Table 170 Fsm Logs: Callee Side; Table 171 Pstn Logs - ZyXEL Communications Network Device P-2602 User Manual

Table 168 RTP Logs

LOG MESSAGE
Error, RTP init fail
Error, Call fail: RTP
connect fail
Error, RTP connection
cannot close

Table 169 FSM Logs: Caller Side

LOG MESSAGE
VoIP Call Start Ph[Phone
Port Number] <- Outgoing
Call Number
VoIP Call Established
Ph[Phone Port] -> Outgoing
Call Number
VoIP Call End Phone[Phone
Port]

Table 170 FSM Logs: Callee Side

LOG MESSAGE
VoIP Call Start from
SIP[SIP Port Number]
VoIP Call Established
Ph[Phone Port] <- Outgoing
Call Number
VoIP Call End Phone[Phone
Port]

Table 171 PSTN Logs

LOG MESSAGE
PSTN Call Start
PSTN Call End
PSTN Call Established
Appendix I Log Descriptions
P-2602H(W)(L)-DxA Series User's Guide
DESCRIPTION
The initialization of an RTP session failed.
A VoIP phone call failed because the RTP session could not be
established.
The termination of an RTP session failed.
DESCRIPTION
Someone used a phone connected to the listed phone port to
initiate a VoIP call to the listed destination.
Someone used a phone connected to the listed phone port to
make a VoIP call to the listed destination.
A VoIP phone call made from a phone connected to the listed
phone port has terminated.
DESCRIPTION
A VoIP phone call came to the ZyXEL Device from the listed SIP
number.
A VoIP phone call was set up from the listed SIP number to the
ZyXEL Device.
A VoIP phone call that came into the ZyXEL Device has
terminated.
DESCRIPTION
A PSTN call has been initiated.
A PSTN call has terminated.
A PSTN call has been set up.
389