Table 163 802.1X Logs - ZyXEL Communications Network Device P-2602 User Manual

P-2602H(W)(L)-DxA Series User's Guide
Table 162 Attack Logs (continued)
LOG MESSAGE
ip spoofing - no routing
entry ICMP (type:%d,
code:%d)
vulnerability ICMP
(type:%d, code:%d)
traceroute ICMP (type:%d,
code:%d)

Table 163 802.1X Logs

LOG MESSAGE
Local User Database accepts
user.
Local User Database reports user
credential error.
Local User Database does not
find user`s credential.
RADIUS accepts user.
RADIUS rejects user. Pls check
RADIUS Server.
Local User Database does not
support authentication method.
User logout because of session
timeout expired.
User logout because of user
deassociation.
User logout because of no
authentication response from
user.
User logout because of idle
timeout expired.
User logout because of user
request.
Local User Database does not
support authentication method.
No response from RADIUS. Pls
check RADIUS Server.
Use Local User Database to
authenticate user.
Use RADIUS to authenticate user. The RADIUS server is operating as the authentication
386
DESCRIPTION
The firewall classified an ICMP packet with no source routing entry
as an IP spoofing attack.
The firewall detected an ICMP vulnerability attack.
The firewall detected an ICMP traceroute attack.
DESCRIPTION
A user was authenticated by the local user database.
A user was not authenticated by the local user database
because of an incorrect user password.
A user was not authenticated by the local user database
because the user is not listed in the local user database.
A user was authenticated by the RADIUS Server.
A user was not authenticated by the RADIUS Server.
Please check the RADIUS Server.
The local user database only supports the EAP-MD5
method. A user tried to use another authentication
method and was not authenticated.
The router logged out a user whose session expired.
The router logged out a user who ended the session.
The router logged out a user from which there was no
authentication response.
The router logged out a user whose idle timeout period
expired.
A user logged out.
A user tried to use an authentication method that the local
user database does not support (it only supports EAP-
MD5).
There is no response message from the RADIUS server,
please check the RADIUS server.
The local user database is operating as the
authentication server.
server.
Appendix I Log Descriptions