Figure 179 Mac Os X 10.4: Network Preferences > Ethernet; Figure 180 Mac Os X 10.4: Network Utility - ZyXEL Communications V501-T1 User Manual

5 For statically assigned settings, do the following:
• From the Configure IPv4 list, select Manually.
• In the IP Address field, type your IP address.
• In the Subnet Mask field, type your subnet mask.
• In the Router field, type the IP address of your device.
Figure 179 Mac OS X 10.4: Network Preferences > Ethernet
6 Click Apply Now and close the window.
Verifying Settings
Check your TCP/IP properties by clicking Applications > Utilities > Network Utilities, and
then selecting the appropriate Network Interface from the Info tab.

Figure 180 Mac OS X 10.4: Network Utility

User's Guide
Appendix B Setting Up Your Computer's IP Address
251