Figure 152 Upload Warning; Figure 153 Network Temporarily Disconnected; Table 122 Maintenance > Tools > Firmware Upload - ZyXEL Communications V501-T1 User Manual

Chapter 16 Tools
The following table describes the labels in this screen.
Table 122 Maintenance > Tools > Firmware Upload
LABEL
Firmware
Upgrade
File Upload
Browse...
Upload
Do not turn off the V500 while firmware upload is in progress!
After you see the Firmware Upload In Process screen, wait two minutes before logging into
the V500 again.

Figure 152 Upload Warning

The V500 automatically restarts in this time causing a temporary network disconnect. In some
operating systems, you may see the following icon on your desktop.

Figure 153 Network Temporarily Disconnected

After two minutes, log in again and check your new firmware version in the Status screen.
If the upload was not successful, the following screen will appear. Click Return to go back to
the Firmware screen.
222
DESCRIPTION
Type in the location of the file you want to upload in this field or click Browse... to find
it.
Click Browse... to find the .bin file you want to upload. Remember that you must
decompress compressed (.zip) files before you can upload them.
Click Upload to begin the upload process. This process may take up to two minutes.
V500 Series User's Guide