Chapter 10 Network Setup
10.3 Management Port
Use this screen to configure the management IP address of the V500. You can use this IP
address to connect to the V500 even when its WAN IP address is in a different subnet. Your
computer must be in the same subnet as the management IP address to use it.
Click Network > Ethernet > Mgnt Port. The following screen displays.
Figure 130 Network > Mgnt Port
The following table describes the labels in this screen.
Table 105 Network > Mgnt Port
LABEL
Management IP Address
IP Address
Apply
Reset
176
DESCRIPTION
Enter the new management IP address you want the V500 to use.
Click this to save your changes.
Click this to reload the previous configuration for this screen.
V500 Series User's Guide