The following table describes the labels in this screen.
Table 39 LCD Menu: IP Address - Edit
LABEL
Current
New
Mode
Save
.
<-
Cancel
7.3.2.2 Default Gateway
Enable and select Advanced Setting > Network Setting > Static IP > Default Gateway. The
following screen displays.
Figure 62 LCD Menu: Default Gateway
Static Gateway
Current: 192.168.1.254
Edit
The following table describes the labels in this screen.
Table 40 LCD Menu: Default Gateway
LABEL
Current
Edit
Back
V500 Series User's Guide
DESCRIPTION
This is the static IP address currently configured on the V500.
Enter the static IP address you want the V500 to use in dotted decimal
notation.
Cycle through different character input modes using the # key.
Press this to save your changes.
Press this to enter a period.
Press this to delete a character.
Press this to return to the previous screen without saving your settings.
Back
DESCRIPTION
This is the static IP address of the device your V500 uses to access the
Internet.
Press this to enter a different static gateway IP address.
Press this to return to the previous screen.
Chapter 7 LCD Menus: Advanced
111