C
H A P T E R
3.1 Overview
These tutorials show you how to perform numerous functions of the V500. Even though they
make certain basic assumptions that may not match your actual configuration environment, the
foundation provided here should be sufficient to get you up and running as quickly as possible.
For complete information on how to work with the LCD menu screens, see
Chapter 4 on page
To get your V500 operational, you must:
• Set up a network connection
• Set up a connection to your VoIP service provider
3.2 Setting Up a Network Connection
The V500 is an IP phone. As such, you need to have an active network connection for it to
work. This allows it to connect to a voice server.
To establish a network connection:
1 For PPoE: Open the
(Off) option and press Select. Configure your PPPoE Username and Password.
PPPoE
1 Username
2 Password
Select
V500 Series User's Guide
61.
(Section 3.2 on page
> Advanced > Network Setting screen, highlight the PPoE
MENU
Back
3
Tutorials
45)
(Section 3.3 on page
47)
45