Figure 108 Macintosh Os X: Network - ZyXEL Communications V300-T1 User Manual

Appendix B Setting up Your Computer's IP Address

Figure 108 Macintosh OS X: Network

4 For statically assigned settings, do the following:
• From the Configure box, select Manually.
• Type your IP address in the IP Address box.
• Type your subnet mask in the Subnet mask box.
• Type the IP address of your V300 in the Router address box.
5 Click Apply Now and close the window.
6 Turn on your V300 and restart your computer (if prompted).
Verifying Settings
Check your TCP/IP properties in the Network window.
Linux
This section shows you how to configure your computer's TCP/IP settings in Red Hat Linux
9.0. Procedure, screens and file location may vary depending on your Linux distribution and
release version.
146
V300 User's Guide