The following table describes the labels in this screen.
Table 86 LCD Menu: Auto Provision Server Port - Edit
LABEL
Current
New
Mode
Save
<-
Back
7.5.4 Expire Time
Use this screen to see or edit the length of time the V500 waits after receiving an auto-
provisioning file before it requests another.
Enable and select Advanced Setting > Auto Provision > Expire Time. The following screen
displays.
Figure 112 LCD Menu: Auto Provision Expire Time
Expire Time
Current Timeout (sec):3600
Edit
The following table describes the labels in this screen.
Table 87 LCD Menu: Auto Provision Expire Time
LABEL
Current Timeout
Edit
Back
V500 Series User's Guide
DESCRIPTION
This shows the auto-provisioning server's listening port number already
configured on the V500.
Enter the new listening port number.
Cycle through different character input modes using the # key.
Press this to save your changes.
Press this to delete a character.
Press this to return to the previous screen.
Back
DESCRIPTION
This shows the expire time already configured on the V500.
Press this to change the expire time.
Press this to return to the previous screen.
Chapter 7 LCD Menus: Advanced
149