Protocol; Figure 106 Lcd Menu: Auto Provision Protocol; Table 81 Lcd Menu: Auto Provision Protocol - ZyXEL Communications V501-T1 User Manual

Table 80 LCD Menu: Auto Provision
LABEL
Expire Time
Retry Time
Select
Back

7.5.1 Protocol

Use this screen to see or edit the protocol that the V500 uses to request and receive the auto-
provisioning file. This protocol must be the same as that used by the auto-provisioning server.
Enable and select Advanced Setting > Auto Provision > Protocol. The following screen
displays.

Figure 106 LCD Menu: Auto Provision Protocol

Auto Provision Protocol
Current: HTTP
Edit
The following table describes the labels in this screen.

Table 81 LCD Menu: Auto Provision Protocol

LABEL
Current
Edit
Back
7.5.1.1 Auto Provision Protocol - Edit
Press Edit in the Auto Provision Protocol screen. The following screen displays.
V500 Series User's Guide
DESCRIPTION
Select this to see or edit how long the V500 waits after it successfully
receives an auto-provisioning file before it requests another.
Select this to see or edit how long the V500 waits, if it requests an auto-
provisioning file but does not receive one, before requesting the file again.
Press this to choose the highlighted entry in the menu.
Press this to return to the previous screen without saving your settings.
Back
DESCRIPTION
This shows the auto-provision protocol already configured on the V500.
Press this to change the auto-provision protocol.
Note: The V500 must use the same protocol as the auto-
provisioning server.
Press this to return to the previous screen.
Chapter 7 LCD Menus: Advanced
145