Table 106 Voip > Sip > Sip Settings - ZyXEL Communications V501-T1 User Manual

Each field is described in the following table.
Table 106 VoIP > SIP > SIP Settings
LABEL
SIP Settings
SIP Account
Active
Account
Name
Number
SIP Local Port Enter the V500's listening port number, if your VoIP service provider gave you
SIP Server
Address
SIP Server
Port
REGISTER
Server
Address
REGISTER
Server Port
SIP Service
Domain
Send Caller ID Select this if you want to send identification when you make VoIP phone calls.
Voice Mail
Number
Paging
Number
DNS SRV
Backup SIP
Server
1st / 2nd
Backup SIP
Server
SIP Service
Address
V500 Series User's Guide
DESCRIPTION
Select the SIP account you want to see in this screen. If you change this field, the
screen automatically refreshes.
Select this if you want the V500 to use this account. Clear it if you do not want the
V500 to use this account.
This is the name that appears in this SIP account's tab on the LCD screen. You
can enter up to 20 printable English keyboard characters, but only the first 6 show
up on the LCD screen account tab.
Enter your SIP number. In the full SIP URI, this is the part before the @ symbol.
You can use up to 50 printable English keyboard characters.
one. Otherwise, keep the default value.
Enter the IP address or domain name of the SIP server provided by your VoIP
service provider. You can use up to 32 printable English keyboard characters. It
does not matter whether the SIP server is a proxy, redirect or register server.
Enter the SIP server's listening port number, if your VoIP service provider gave
you one. Otherwise, keep the default value.
Enter the IP address or domain name of the SIP register server, if your VoIP
service provider gave you one. Otherwise, enter the same address you entered in
the SIP Server Address field. You can use up to 32 printable English keyboard
characters.
Enter the SIP register server's listening port number, if your VoIP service provider
gave you one. Otherwise, enter the same port number you entered in the SIP
Server Port field.
Enter the SIP service domain name. In the full SIP URI, this is the part after the @
symbol. You can use up to 32 printable English keyboard characters.
Clear this if you do not want to send identification.
Enter the voicemail number associated with this SIP account.
The paging feature allows you to call a group of extensions simultaneously. When
this is configured and you press the PAGING key on the V500, all the extensions
in the group automatically go into speakerphone mode.
Your system administrator must set up paging groups on the network, and you
must know the paging number for the group. Enter the group number in this field.
Select this to use the DNS server(s) you configured in the Network > Ethernet >
Internet Connection screen.
Select the check box to have the V500 use the backup SIP server(s) you
configure. If the V500 cannot use the server you configured in the SIP Settings
section of this screen, it tries to use the backup server(s). It tries to use the 1st
Backup SIP Server and, if it cannot connect, then tries to use the 2nd Backup
SIP Server.
Enter the IP address or domain name of the backup SIP server provided by your
VoIP service provider. You can use up to 32 printable English keyboard
characters. It does not matter whether the SIP server is a proxy, redirect or
register server.
Chapter 11 SIP Account Setup
179