Table 128 Power Over Ethernet Injector Specifications; Table 129 Power Over Ethernet Injector Rj-45 Port Pin Assignments - ZyXEL Communications V501-T1 User Manual

Appendix A Product Specifications
Table 127 Standards Supported (continued)
STANDARD
RFC 3891
RFC 3892
RFC 4028
ITU Q.23
Power over Ethernet (PoE) Specifications (V501-T1 Only)
You can use a power over Ethernet injector to power the V501-T1. The injector must comply to IEEE
802.3af.

Table 128 Power over Ethernet Injector Specifications

Power Output
Power Current

Table 129 Power over Ethernet Injector RJ-45 Port Pin Assignments

1 2 3 4 5 6 7 8
Wall-mounting Instructions
Complete the following steps to hang your V500 on a wall.
See Table 125 on page 235
place them.
1 Select a position free of obstructions on a sturdy wall.
2 Drill two holes for the screws.
238
DESCRIPTION
The Session Initiation Protocol (SIP) "Replaces" Header
The Session Initiation Protocol (SIP) Referred-By Mechanism. R.
Session Timers in the Session Initiation Protocol (SIP)
Dual-Tone Multi-Frequency signaling (DTMF)
15.4 Watts maximum
400 mA maximum
RJ-45 SIGNAL
PIN NO
ASSIGNMENT
1 Output Transmit Data +
2 Output Transmit Data -
3 Receive Data +
4 Power +
5 Power +
6 Receive Data -
7 Power -
8 Power -
for the size of screws to use and how far apart to
V500 Series User's Guide