Advertisement
Model:
ISDN Option
Subject:
US National ISDN
From:
IPP Business Division Technical Service Dpt.
Classification:
This technical bulletin informs of the settings required when a machine is connected to the
US National ISDN network
Models: CFO, CGO, LHO, FX4, ADAM
•
Subscriber Number
Input the subscriber number given by the telephone company at :
1.G4 SUBSCRIBER NO.1 (MAIN)
2.G3 SUBSCRIBER NO.1 (MAIN)
•
SPID Number (Service Profile Identification Number)
Input the SPID number given by the telephone company at :
1.G4 SUBSCRIBER NO.2 (Sub)
2.G3 SUBSCRIBER NO.2 (Sub)
Note: Input a "_" (pause) before the SPID number.
•
G4 Internal Switches
SW No.
Bit
SW11
Bit1
SW13
Bit2
Bit5
SW14
Bit0
Bit5
SW15
Bit7
SW19
Bit0
Bit2
Bit3
Note: After completing a G4 service mode operation, turn off the machine and turn it
back on to make the new settings take effect.
RC
RE
ASIA
∗
T
echnical
Troubleshooting
Mechanical
Paper path
Other (
)
Setting
0: Dynamic TEI
1: Yes
1: Yes
1: Speech
1: Keypad facility
1: On
1: Permanent
1: On
1: On
B
ulletin
Date:
30-Nov-97
Prepared by:
Part information
Electrical
Transmit/receive
Type of TEI used (Layer 2) (Default)
Attachment of calling party number (L3 SET UP)
Attachment of channel information element (L3
CONN)
ISDN G3 information transfer capability (L3)
Called ID mapping (L3)
Transmission of STAT in reply to STAT_ENQ
received in the U0 state.
Permanence of the link (L2)
SPID procedure (L2)
G4 SPID procedure (L2)
No:
Multi - 006
H.Kamiya
Action required
Service manual revision
Retrofit information
Definition
PAGE: 1/1
Advertisement
Troubleshooting
