Advertisement
INSTALLATION
INSTALLING ADDITIONAL UNITS
3.2.6. Hard Disk
If the ISDN option is installed at the same time, the hard disk option
must be installed prior to the ISDN option.
The installation has three phases.
A. SAF memory initialization
B. Bit switch programming
C. Software initialization
D. Hard disk formatting
A. SAF Memory Initialization
1.
Function
6
2.
0
1
3. Set bit 2 of bit switch 00 to 1.
4.
Yes
Function
B. Installation Procedure
Cuation: Print any messages still stored in the SAF.
Ensure that 100% memory is displayed on the operation panel
before installing a hard disk, or data may be lost.
1. Turn off the power switch, and unplug the machine from the wall socket.
Caution: Do not plug in or switch on until the entire installation is
completed.
2. Remove the rear cover [A], and
disconnect the monitor speaker
harness [B].
3. Take off the right cover [C].
0
1
9
9
1 , then immediately
3-12
RTB: CGO-004
Yes
[A]
[C]
Page 2/4
[B]
Advertisement
Troubleshooting
