Introduction
Product overview
This is the installation manual for TruVision Multi-Imager 360 Degree IP
Camera:
SKU
Description
TruVision Multi-Imager 360 Degree IP Camera, 20MP/4 x 5MP image
TVS-5101
sensors, 2.8 to 12 mm motorized lenses, True D/N, WDR, 30 m IR, Audio,
Alarm, Micro SD/SDHC /SDXC Slot, IP67, IK10, Heater, Hi-PoE/12 VDC
You can download the following manuals from our web site:
•
TruVision 20MP (4 x 5MP) 360 Degree Multi-Imager Camera
Installation Guide
•
TruVision 20MP (4 x 5MP) 360 Degree Multi-Imager Camera
Configuration Manual
The manuals are available in several languages on the EMEA web site.
Installation
This chapter provides information on how to install the camera.
Installation environment
When installing your product, consider these factors:
Electrical: Install electrical wiring carefully. It should be done by
•
qualified service personnel. Always use a proper Hi-PoE switch or a
12 VDC UL listed Class 2 or CE certified power supply to power the
camera. Do not overload the power cord or adapter.
•
Ventilation: Ensure that the location planned for the installation of the
camera is well ventilated.
•
Temperature: Do not operate the camera beyond the specified
temperature, humidity or power source ratings. he operating
temperature of the camera is between -40°C to +60°C (40°F to
+140°F). Humidity 95% or less (non-condensing) for the camera.
2
Installation Guide