Casio TE-7000S Service Manual page 57

[ 17 ] Internal printer graphic print test
[Function]
This test will check the graphic patterns in the receipt/journal of the internal printer.
[Operation]
Operation : P1 P1 P1 P2 P2 P2
P1:0 = Graphic patter 1 (change 8 bit into a decimal number and input it)
P2:0 = Graphic patter 2 (change 8 bit into a decimal number and input it)
n: 0 = One time check (Can be omitted)
not 0 = Continuous check (To stop the test, press "Esc" key)
d: 3 = prints only receipt
4 = prints only journal
5 = prints both receipt/journal (prints alternately)
The graphic patterns and the print images are as follows;
Graphic pattern 1
Graphic pattern 2
Graphic pattern 1
Graphic pattern 2
:
: repeat (for 28 Dot line )
* Print patterns and commands
1 Receipt, 25% pattern, continuous
0 8 5
The display unit of the print pattern image in the right is as follows;
Horizontal: dot
Vertical: do line
2 Receipt, 50% pattern, continuous
0 8 5
The display unit of the print pattern image in the right is as follows;
Horizontal: dot
Vertical: do line
3 Receipt, 100% pattern, continuous
2 5 5
The display unit of the print pattern image in the right is as follows;
Horizontal : dot
Vertical : do line
[LCD]
PRT P1P1P1P2P2P2na3d
END P1P1P1P2P2P2na3d
[Print] Refer to "Print patterns and commands".
n
0 0 0 1 1 3
1 7 0 1 1 3
2 5 5 1 1 3
— 55 —
1 3 d SUBTOTAL
3 SUBTOTAL
3 SUBTOTAL
3 SUBTOTAL
Print pattern image
Print pattern image
Print pattern image