Casio TE-7000S Service Manual page 48

[ 3 ] RAM WRITE/READ test
[Function]
WRITE/READ test for RAM is performed.
A counter is displayed for RAM test as follows.
[Operation]
Operation : n
n: 0 = one time check (can be omitted)
not 0 = continuous check (To stop the test, press "Esc" key)
[LCD]
RAM n011
RAM WR OK
END n011
[PRINT]
RAM n011
RAM WR OK
END n011
[ 4 ] RAM READ ONLY test
[Function]
READ ONLY test for RAM is performed
Note that WRITE test (n011) must be performed right before this test.
[Operation]
Operation : n
n: 0 = one time check (can be omitted)
not 0 = continuous check (To stop the test, press "Esc" key)
[LCD]
RAM n111
RAM RD OK
END n111
[PRINT]
RAM n111
RAM RD OK
END n111
0 1 1 SUBTOTAL
Displays the address of the error in case the test ended
with an error.
Prints the address of the error in case the test ended with
an error.
1 1 1 SUBTOTAL
Displays the address of the error in case the test ended
with an error.
Prints the address of the error in case the test ended with
an error.
— 46 —