3 BLOCK DIAGRAM
CAT5 UTP Cable
OUT
(Min 5m) IN
Connection
4
INLINE2 (CAT5) OUT
INLINE2 (CAT5) IN
Terminator Switch
Turn on the switch of the units of
both first and the last ends.
LAN CABLE
5
LAN cable specifications
CAT5 UTP Cable (TIA/EIA 568)
0.5mm x 4P Not shielded wire Twist pair cable
NOTE:
1) The power of all units which share the network must be turned on.
If even one of them is OFF, normal communication cannot be done.
If any of the units has a failure and its power is turned off, remove the unit from the network.
2) Communication speed of the categoly 5 is fixed 312.5kbps.
3) When using CAT5, slide the switch at the bottom of ECR to CAT5 side.
CAT5 UTP Cable
OUT
(Min 5m) IN
White/Orange 1
Orange 2
White/Green 3
Blue 4
White/Blue 5
Green 6
White/Brown 7
Brown 8
— 38 —
RS232C
PC
1 White/Orange
8, 7, 6, .....2, 1
2 Orange
3 White/Green
4 Blue
5 White/Blue
6 Green
7 White/Brown
8 Brown