Repair Procedures - Genie SUPERLIFT Contractor SLC-6 Parts & Service Manual

Parts and Service Manual - First Edition
Observe and Obey:
It! Repair procedures shall be completed by a
person trained and qualified on the repair of
this machine.
It!
Immediately tag and remove from service a
damaged or malfunctioning machine.
It!
Repair any machine damage or malfunction
before operating the machine.
Before Repairs Start:
It!
Read, understand and obey the safety rules
and operating instructions in the
Genie Super/itt Contractor Operator's Manual.
It! Be sure that all necessary tools and parts are
available and ready for use.
It! Be sure the capacities of sawhorses or other
supports are sufficient to withstand machine
weight. See Specification section for specific
weight.
It! Be sure overhead cranes or other lifting
devices are of ample capacity to handle
machine weight. See Specification section for
specific weight.
It! Read each procedure completely and adhere to
the instructions. Attempting shortcuts may
produce hazardous conditions.
It!
Unless otherwise specified, perform each
procedure with the machine in the following
configuration:
machine positioned on a flat level surface
carriage fully lowered
casters locked
Section 6 - Repair Procedures
Repair Procedures
About This Section
Most of the procedures in this section should only
be performed by a trained service professional
in a suitably equipped workshop. Select the
appropriate repair procedure after troubleshooting
the problem.
Perform disassembly procedures to the point
where repairs can be completed. Then to
re-assemble, perform the disassembly steps in
reverse order.
General Repair Process
Identify
symptoms
problem
still exists
Symbols Legend
1-----1.-1
Troubleshoot
Perform
repair
F!1ifl1tdiJ;j
Indicates the
~resence
of a
...,..,_ ..
_w,_~_..,_.,_iJ.I.oilll-
hazard that
w11l
cause death or
serious injury.
Indicates the presence of a
hazard that may cause death or
serious injury.
Indicates the presence of a
hazard that will or may cause
serious injury or damage to the
machine.
I:
Fi i
[ij
Jll
lnd~cates spe~ial oper~tion
or
!lllll.si.i-t...AJ~_.w._.t.
__
J,;;!i_lllll
mamtenance 1nformat1on.
0
Indicates that a specific result is expected after
performing a series of steps.
Part No. 33953 Genie Superlift Contractor 6-1