Winch Will Not Operate - Genie SUPERLIFT Contractor SLC-6 Parts & Service Manual

Section 5 -Troubleshooting Flow Charts Parts and Service Manual- First Edition
Chart 3
Winch Will
Not Operate
5-4
Check position of load
obstructions
for proper
centering and
no obstructions.
no obstructions
Check the
cable
for Remove the bound up
binding at the winch
binding
cable and inspect the
drum and inside the cable and related
mast components for
damage.
not binding
Check winch
for
proper Replace the damaged
~ation.See
bad
component See Repair
a ntenance procedure ~rocedure
3-1,
How
to
A-4, Check the Winch epair the Winch.
Operation.
good
Check carriage and
bad
Replace damaged
mast for damaged column OR consuH
column(s). Genie Industries
Service Department
good
ConsuH Genie
Industries Service
Department
Genie Superlift Contractor
Re-position load to
eliminate obstruction.
Be
sure load is properly
centered.
bad
Replace the damaged
component(s).
Part No. 33953