Scheduled Maintenance Procedures - Genie SUPERLIFT Contractor SLC-6 Parts & Service Manual

Table of Contents

Advertisement

Parts and Service Manual- First Edition
Section 4 - Scheduled Maintenance Procedures
Scheduled Maintenance Procedures
Observe and Obey:
ltl Maintenance procedures shall be completed by
a person trained and qualified on the
maintenance of this machine.
ltl Scheduled maintenance procedures shall be
completed daily, quarterly (every 3 months)
and annually as specified on the maintenance
inspection report.
Failure to properly complete each
inspection when required may
result in death, serious injury or
substantial machine damage.
ltl Immediately tag and remove from service a
damaged or malfunctioning machine.
ltl Repair any machine damage or malfunction
before operating machine.
ltl Keep records on all inspections for three years.
ltl Be sure the capacities of sawhorses or other
supports are sufficient to withstand machine
weight. See Specifications section for specific
weight.
ltl Be sure overhead cranes or other lifting
devices
ar~
of ample capacity to handle
machine weight. See Specifications section for
specific weight.
ltl Unless otherwise specified, perform each
procedure with the machine in the following
configuration:
machine positioned on a flat level surface
carriage fully lowered
casters locked
load handling attachment installed
About This Section
This section contains detailed procedures for each
scheduled maintenance inspection.
Each procedure includes a description, safety
warnings and step-by-step instructions.
Symbols Legend
iiM%ihi M r!JH i1
Indicates the presence of a
!L::A
L~J
k
t;::A
J
;~
hazard that will cause death or
serious injury.
Indicates the presence of a
hazard that may cause death or
serious injury.
;v;;;v;;;········.··NN· ··
·.·.··N·······.
Indicates the presence of a
1·!1 .• 1111!,!
hazard that will
or
may cause
serious injury or damage to the
machine.
Indicates special operation or
maintenance information.
0 Indicates that a specific result is expected after
performing a series of steps.
Part No. 33953
Genie Superlift Contractor
4- 1

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents