Scheduled Maintenance Procedures - Genie Superlift SL-5 Parts & Service Manual

Parts and Service Manual - First Edition

Scheduled Maintenance Procedures

Observe and Obey:
Maintenance procedures shall be completed by
a person trained and qualified on the
maintenance of this machine.
Scheduled maintenance procedures shall be
completed daily, quarterly (every 3 months)
and annually as specified on the maintenance
inspection report.
Failure to properly complete each
inspection when required may
result in death, serious injury or
substantial machine damage.
Immediately tag and remove from service a
damaged or malfunctioning machine.
Repair any machine damage or malfunction
before operating machine.
Keep records on all inspections for three years.
Be sure the capacities of sawhorses or other
supports are sufficient to withstand machine
weight. See Specification section for specific
weight.
Be sure overhead cranes or other lifting
devices are of ample capacity to handle
machine weight. See Specification section for
specific weight.
Unless otherwise specified, perform each
procedure with the machine in the following
configuration:
· machine positioned on a flat level surface
· carriage fully lowered
· casters locked
· load handling attachment installed
Part No. 32283
Section 4 - Scheduled Maintenance Procedures
About This Section
This section contains detailed procedures for each
scheduled maintenance inspection.
Each procedure includes a description, safety
warnings and step-by-step instructions.
Symbols Legend
Indicates that a specific result is expected after
performing a series of steps.
Genie Superlift
Indicates the presence of a
hazard that will cause death or
serious injury.
Indicates the presence of a
hazard that may cause death or
serious injury.
Indicates the presence of a
hazard that will or may cause
serious injury or damage to the
machine.
Indicates special operation or
maintenance information.
4 - 1