Wiring Information - Johnson Controls P2000 Hardware Installation

CKM-CE75-E1M
24-10707-112 Rev. D
W I
IRING NFORMATION
This section illustrates wiring details for the enclosure assembly.
Power Supply Wire Routing
Figure 3-2 shows a typical installation. Actual configuration and wire
routing vary based on the components in your
For AC wiring, use
1/2 inch knockouts
Figure 3-1: Mounting an Enclosure
CKM-CE75-E1M
Figure 3-2: Power Supply Wire Routing
3-2
Installation and Wiring
system.
Do not use 1/2 - 3/4 inch
double knockouts
Top