Bushnell WIRELESS Trophy Cam HD Instruction Manual page 44

TROUBLESHOOTING / FAQ : WIRELESS FUNCTIONS
Q: Why won't the GPS command work?
A: Your SIM must have data service active to use this function. Some
carriers may not support this feature. See page 32.
Q: Why can't I send commands to control the camera remotely?
A: You must have text service activated by your carrier.
Q: Why can't I get SMTP to work?
A: Make sure your SIM has data service active. Make sure you input both
sender and receiver email setups correctly. It is also recommended to set
up a separate email account (Gmail) for the camera.
Q: Why can't I get my SIM card to work?
A: Make sure to remove the PIN code (please refer to pg. 5), also make
sure there is enough credit on your SIM card, that the Country/operator
settings are correct and that there is no mistake in your phone number
or email address. Check that are both SIM card and SD card are in place. If
you still have a problem please log on to www.trophycam.eu/wireless.
44