Bushnell WIRELESS Trophy Cam HD Instruction Manual page 22

Parameter
IR LED Control
(Multi-Flash
feature)
Camera Name
Video Size (only
affects video
clips in Video
mode)
22
Settings
(Bold=default)
High, Medium, Low
(Input)
See "Camera Name
Input", pg. 33"
848x480,
HD1280x720,
HD1920x1080
Description
Controls how many LED lamps fire
when images are taken in low light.
"High"=all 33 LEDs fire, which is the
default setting. Set to Medium or
Low if you are getting overexposed
flash photos or will place the camera
at very close range to the subject
you want to photograph. In general,
select High if most of your intended
subjects will be over 30 ft. from the
camera, Medium for the 15 to 30 ft.
range, and Low for subjects under
15 ft. away. Note: in video mode, with
LED Control set to High, the maximum
length of each video captured at night
will be 15 seconds to avoid excessive
battery drain, even if the Video Length
parameter is set to a higher value (see
next page).
Allows the user to set a custom
name for the camera. Useful for ID
purposes when multiple cameras
are setup, since each camera will
imprint its name on all photos (but
not videos) it captures.
Selects video resolution (in pixels
per frame). Higher resolution
produces better quality videos,
but creates larger files that take up
more of the SD card capacity (fills up
faster). The highest settings provides
HD video. Using high speed SD cards
(SanDisk SDHC class 6 or higher) is
®
recommended if you will use the
1280x720 or 1920x1080 HD video
settings.