Bushnell WIRELESS Trophy Cam HD Instruction Manual page 17

The checkmark will appear next to your new setting to confirm this
(Fig. 4c).
EXAMPLES-Changing the Settings of Some Common
Parameters
Following this page, you will find tables listing all of the parameters found in
the SETUP Menu, along with their possible settings (or range of settings), and
a detailed description of what the parameter controls and what the settings
do. If you read the previous section detailing how to select parameters and
change their settings, you should be able to dive right in, find the parameter(s)
you want, and setup the camera to suit your preferences. But maybe you'd
rather walk through an example or two first:
To change any parameter's setting, always start with the power switch in
the SETUP position. After the LCD comes on, wait until you see the message
"Wireless Network Initialization Success!", then press the MENU key.
The first parameter you will see when you first enter the SETUP Menu is
"Mode". To change it from its default setting of "Camera" (still photos) to "Video"
(shoot video clips), press the DOWN key to select the "Video" setting. Press the
OK key to "Execute" (Set) the new setting you've selected for this parameter.
Now press the RIGHT key to move to another parameter in the Menu. Pressing
it three times will take you to "Capture Number". Try using the UP and DOWN
keys to scroll through the range of settings, then press OK to lock in your
setting for the number of photos the camera takes each time it's triggered.
Press the RIGHT key until you reach the "Default settings" parameter.
Highlight to select "Execute" (using UP or DOWN) then press OK to restore all
parameters (including the Mode and Video Length parameters you changed a
minute ago) back to their original factory default settings. The default settings
for each parameter are indicated in bold type in the SETUP Menu tables on
the next several pages.
Be sure the current date and time are set correctly if you choose to set the
"Time Stamp" parameter to "On", since that will tell the camera to imprint the
date and time on each of the images it captures. The camera will get the date
and time when it first connects to the network. You can also manually set or
17