Siemens SINUMERIK 840D sl Function Manual page 859

Figure 13-5
Absolute programming along the shortest path (DC)
POS[axis name] = DC(value)
● The value identifies the rotary-axis target position in a range from 0° to 359.999°. Alarm
● With DC (Direct Control), the rotary axis approaches the programmed absolute position
● The control calculates the direction of rotation and the traverse path according to the
● DC application example: the rotary table is required to approach the changeover position
● If DC is programmed with a linear axis, alarm 16800, "DC traverse instruction cannot be
Extended Functions
Function Manual, 09/2009, 6FC5397-1BP20-0BA0
Examples of absolute programming for modulo axes
16830, "Incorrect modulo position programmed", is output for values with a negative sign
or ≥ 360°.
within one revolution along the shortest path (traversing movement max. ∓ 180°).
current actual position. If the path to be traversed is the same in both directions (180°),
the positive direction of rotation receives preference.
in the shortest time (and, therefore, via the shortest path) possible.
used", is output.
R2: Rotary axes
13.3 Programming rotary axes
859