Siemens SINUMERIK 840D sl Function Manual page 1135

Spindle manual travel, 327
Spindle number, 982
Spindle position with mono probe, 607
Spindle replacement, 470
Standard alarm texts, 92
Start operating area, 91
Static HMI property, 88
Static NC memory, 925
Static user memory, 928
Station/position change, 102
Status query
HW outputs, 708
Stop along braking ramp, 1077
Stop at next reversal point, 1077
Stroke initiation active, 1070
Stroke inoperative, 1070
Stroke suppression, 1069
Superimposed motion, 1082
Suppression
Algorithm, 89, 118
Mechanism, 85
Rules, 119
Strategy, 89, 119
Switchover
Attempt, 95
Behavior on OP030, 91
Conditions, 120
Time, 91
Symbol name, 89
Synchronism coarse, 1081
Synchronism fine, 1081
Synchronized action, 103
Synchronized state reached, 887
Synchronous mode, 876, 1080
Deactivate, 896
Knee-shaped acceleration characteristic, 919
Synchronous spindle
Position offset, 905
System variables, 103, 554, 614
Global, 103
T
Table
Compensation, 355, 356
Task specification, 524, 539
Temperature
Compensation, 345
Influence, 345
Temperature compensation
Coefficient tanß(T), 351
Temporary assignment, 81
Extended Functions
Function Manual, 09/2009, 6FC5397-1BP20-0BA0
Terminal X143, 318
Test program for testing repeat accuracy, 689
Time constant
Dynamic response adaptation, 405
Tool change
Fixed points, 970
Sequence, 967
Tool change point, 970
Tool change times, 968
Tool length
($AC_MEAS_TYPE = 10), 668
Measurement with stored or current position
($AC_MEAS_TYPE = 23), 672
Measurement with zoom-in function
($AC_MEAS_TYPE = 22), 671
Tool measurement of two milling tools
Each with their own reference point, 677
With one reference point, 678
Tool measurement of two turning tools
Each with their own reference point, 674
With one reference point, 675
Tool measuring, 667
of two milling tools each with their own reference
point, 680
of two milling tools with one reference point, 681
Two turning tools each with their own reference
point, 673
Tool offset for grinding tools, 976
Tool types for grinding tools, 980
TRAANG
Activating, 546
Amount, 541
Brief description, 500
Deactivation, 546
Inclined axis, 539
Restrictions, 547
Specific settings, 543
TRAANG_Angle_m, 544
TRAANG_BASE_TOOL_m, 544
TRAANG_PARALLEL_ACCEL_RES_m, 545
TRACYL, 498
Amount, 527
Axis image, 531
Restrictions, 536
Tracyl transformations, 581
TRACYL_BAE_TOOL_t, 533
TRACYL_ROT_AX_OFFSET_t, 532
TRACYL_Rot_Sign_IS_PLUS_t, 532
TRAFO_AXES_IN_n, 507
TRAFO_TYPE, 530
TRAFO_TYPE_n, 506, 543
TRANS, 865
Index
1135