Tracyl (Option) - Siemens SINUMERIK 840D sl Function Manual

M1: Kinematic transformation

7.3 TRACYL (option)

7.3 TRACYL (option)
7.3
Note
The TRACYL transformation described below requires that unique names are assigned to
machine axes, channels and geometry axes when the transformation is active. See
MD10000 $MN_AXCONF_MACHAX_NAME_TAB,
MD20080 $MC_AXCONF_CHANAX_NAME_TAB,
MD20060 $MC_AXCONF_GEOAX_NAME_TAB.
Besides this, no unequivocal assignments exist.
Task specification
Groove machining, see diagram.
Axis Configuration (1)
Figure 7-10
524
Machining grooves on a cylinder surface with X-C-Z kinematics
Function Manual, 09/2009, 6FC5397-1BP20-0BA0
Extended Functions