Siemens SINUMERIK 840D sl Function Manual page 1113

Hide thumbs Also See for SINUMERIK 840D sl:
Table of Contents

Advertisement

PLC program memory
SINUMERIK 840D: The PLC user program, the user data and the basic PLC program are
stored together in the PLC user memory.
PLC programming
The PLC is programmed using the STEP 7 software. The STEP 7 programming software is
based on the WINDOWS standard operating system and contains the STEP 5 programming
functions with innovative enhancements.
Polar coordinates
A coordinate system, which defines the position of a point on a plane in terms of its distance
from the origin and the angle formed by the radius vector with a defined axis.
Polynomial interpolation
Polynomial interpolation enables a wide variety of curve characteristics to be generated,
such as straight line, parabolic, exponential functions (SINUMERIK 840D).
Positioning axis
Axis that performs an auxiliary movement on a machine tool (e.g. tool magazine, pallet
transport). Positioning axes are axes that do not interpolate with → path axes.
Position-time cams
The term "position-time cam" refers to a pair of software cams that can supply a pulse of a
certain duration at a defined axis position.
Pre-coincidence
Block change occurs already when the path distance approaches an amount equal to a
specifiable delta of the end position.
Program block
Program blocks contain the main program and subroutines of → part programs.
Programmable frames
Programmable → frames enable dynamic definition of new coordinate system output points
while the part program is being executed. A distinction is made between absolute definition
using a new frame and additive definition with reference to an existing starting point.
Extended Functions
Function Manual, 09/2009, 6FC5397-1BP20-0BA0
Glossary
1113

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Sinumerik 840de slSinumerik 828d

Table of Contents