Measurement; Signals From Nc (Db10); Signals From Axis/Spindle (Db31 - Siemens SINUMERIK 840D sl Function Manual

Z2: NC/PLC interface signals

19.8 Measurement

19.8 Measurement
19.8
19.8.1

Signals from NC (DB10)

DB10
DBX107.0 and
DBX107.1 Probe actuated
Edge evaluation: No
Signal state 1 or Probe 1 or 2 is actuated.
edge change 0 → 1
Signal state 0 or Probe 1 or 2 is not actuated.
edge change 1 → 0
References /PHD/ Equipment Manual NCU
19.8.2

Signals from axis/spindle (DB31, ...)

DB31, ...
DBX62.3 Measuring status
Edge evaluation: No
Signal state 1 or The "Measuring" function is active.
edge change 0 → 1
This signal is used during measuring and displays the current measuring status of the axis.
Signal state 0 or The "Measuring" function is not active.
edge change 1 → 0
1064
Signal(s) updated: Cyclic
Signal(s) updated: Cyclic
Function Manual, 09/2009, 6FC5397-1BP20-0BA0
Extended Functions