Siemens SINUMERIK 840D sl Function Manual page 1128

Index
System variables, 62
Identification
Operator panels, 132
Identification of spindles, 505
INC, 942, 943
INCH or METRIC unit of measurement, 628
Inclined axis
TRAANG, 539
Inclined axis transformations, 582
Incremental travel, 292
Incremental travel (INC), 943
Continuous operation, 292
Jog mode, 292
Indexing axes
Coded position, 948
FRAMES, 952
Handwheel, 943
Programming, 948
Reference point approach, 962
Startup, 959
Indexing axis
Parameter setting, 946
Indexing axis in position, 1083
Indexing positions
Number, 946
Indexing positions table, 946
Infeed, 809
Initial learning, 434
Input override for geometry axis (1, 2, 3), 1041
Input values, 616
Measurement types, 617
Setpoints, 619
Interface, 287, 611
Interface signals
Activate handwheel (1 to 3), 1053
Active machine function INC1, ..., continuous, 1060
Active machine function for geometry axis (1, 2,
3), 1048
Continuous machine function, 1056
Contour handwheel active (1 to 3), 1046
DRF selected, 1045
Handwheel active (1 to 3), 1058
Handwheel active (1 to 3) for geometry axis, 1046
Handwheel override active, 1045, 1058
JOG - Approaching fixed point 0/1/2, 1057
JOG - Approaching fixed point active, 1061
JOG - Approaching fixed point reached, 1061
Machine function INC1, INC10, INC100, INC1000,
INC10000, INCvar, 1056
Plus and minus travel command, 1059
Plus and minus travel command (for orientation
axis), 1049
1128
Plus and minus travel commands (for geometry
axis), 1047
Plus and minus traverse keys, 1055
Plus and minus traversing request, 1059
Plus and minus traversing request (for geometry
axis), 1046
Plus and minus traversing request (for orientation
axis), 1048
Rapid traverse override, 1054
Traversing-key lock, 1053
Interpolation, 101
Linear, 771
Non-linear, 772
with G0, 771
Interpolation cycle, 103
Interpolation functions, 805
Interpolation point, 355
Interpolator
Path, 771
Shaft, 771
Interrupt parts program, 513, 538
IPOBRKA, 793, 795
IPOENDA, 792
IS Feedrate stop/Spindle stop (DB31, ... DBX4.3), 888
J
JOG, 330, 555, 942
Approaching a fixed point, 331
JOG mode, 284
Jogging operation, 942
L
Language command
SPN, 736, 738
SPP, 735, 737
Language commands, 725
Large batch production, 99
Learning ON / OFF, 431
Learning the neural network, 429
Link
Axis, 101, 102
Link axes
Typical link cycles, 144
Link function, 144
Link module, 102, 103
Link variables, 81
Global, 103
Linked transformation
Example, 552
Local NCU, 96
Function Manual, 09/2009, 6FC5397-1BP20-0BA0
Extended Functions