Arpeggio Playback; Select A Voice; Arpeggio Type, Tempo, And Limit - Yamaha S90 Owner's Manual

Arpeggio playback

1 Select a Voice/

Performance (pages 36, 41).
2 Turn the Arpeggio on by
pressing the [ARPEGGIO]
button.
ARPEGGIO
n When you select a voice or performance for which the
Arpeggio Switch is set to on, the [ARPEGGIO] button is
automatically turned on.
n The on/off status of the [ARPEGGIO] button can be
stored to each voice or performance setup
(page 73).
3 Play the keyboard.
While holding the key(s), the Arpeggio is played back
according to the played note, Arpeggio type, tempo,
note limit settings, and so on.
n In the Voice Play mode, the Arpeggio is played back via
the selected voice.
n In the Performance/Mixing mode, the Arpeggio is played
back via the voice assigned to the selected part when the
Arpeggio Switch (Part Edit [F1] [SF2] Ref. #77) of the
selected part is set to on (page 47).
46
Using the Arpeggio function
EFFECT PLAY/
BYPASS STOP
Arpeggio Type,
Tempo, and Limit
A variety of Arpeggio types are provided with the S90.
You can change the tempo of Arpeggio as desired.
The Arpeggio function is available in all modes.
The explanation below applies to the Performance Play
mode.
1 Call up the ARP (Arpeggio)
display by pressing the [F6]
button in the Performance
Play mode.
SF1 SF2
F1 F2 F3
2 Select an Arpeggio Bank.
Move the cursor to the Bank parameter and select.
3 Select an Arpeggio Type.
Move the cursor to the Type parameter and select.
SF3 SF4 SF5 INFORMATION
F4 F5 F6